Audioque är på väg

[Audio-control.se]

Nu är AudioQue äntligen på väg till Sverige som efter hårda förhandlingar med fabriken i USA endast kommer säljas via butiken i Vallentuna och Webshopen DDproAUDIO.se / Audio-Control.se.

Förhandsboka era AudioQue produkter NU!! Ring!! 08-51174010 för mer AudioQue Info

The MONSTER!!!

[Audio-control.se]

Re: AUDIOQUE ÄR PÅ VÄG!!

Monstret heter AudioQue 20K och är det värsta som någonsin har kommit ur DD/AQ fabriken



Just to give you an idea, at 12v you’ll need 2050amps to feed it!!!

Specifications
Model AQ20
Input Sensitivity 0.15V ~ 5V
Variable Subsonic Filter 10Hz ~ 50Hz @ 24dB/Slope
Variable Low Pass Filter 35Hz ~ 250Hz @ 24dB/Slope
Tested Voltage 12.5V
THD <1%
Cont. Power @ 1 ohm 8000w
Damping Factor 150 <
Dynamic Power 20,000W
Signal to Noise Ratio 100dB <
Dimensions (mm) 980mm (L) x 300mm (W) x 76mm (H)
Dimensions (in) 38.58in (L) x 11.8in (W) x 3in (H)
Weight 63 lbs

This AQ20 amplifier has undergone quality control scrutiny at every step of production. Each board is hand inspected after wave solder and output devices are soldered by hand.

After the PB is fully loaded, the circuit is checked for proper function. The next step is final assembly into the heatsink chassis and pressure mounting the power devices. Each amp then goes to bench testing where pre-amp functions are tested and power output is tested at 14.4 Volts.

After bench testing, all AQ20 amps are ran continuously for 3 hours on 1 Ohm resistive loads.

The AQ20 amps are tested again in Oklahoma City on 1 Ohm reactive loads to ensure 100% function and eliminate the possibility of shipping damage to the circuits. We guarantee the AQ20 to be perfectly functioning before leaving our facility

Det finns inget värre där ute......tro mig...

[Audio-control.se]

Re: Audioque är på väg

De första lyckliga ägarna har snart fått sina BESTAR